Choose the location
- High and rigid. At least 5 m above the water. Higher gives longer range and better distances.
- Clear view. No antennas, radar, flags or boat structure in the view.
- No heat in view. Exhausts disturb the thermal cameras.
- Low vibration. Away from engine vibration.
- Upright only, on a flat, horizontal surface.
Keep the space free

WarningHitting an obstacle while Sentry moves can break the mount. This can cause injury or death.
Distance to radar and radios

- 1 m from any S-band (or lower frequency) radar antenna.
- 2 m from the radar beam. The beam spreads 20° up and down.
- 1 m from radio antennas and their cables, for example VHF.
Strong interference can reduce the image quality. The app then shows a message. Move Sentry further away from the source.

What is in the box
| Part no. | Part | Basic kit F06123 | Professional kit F06124 |
|---|---|---|---|
| F06100 | Sentry unit | ✓ | ✓ |
| A02871 | DC-DC converter 24/24-12 (Victron Orion-Tr) with remote switch | ✓ | ✓ |
| A02233 | Power cable, 10 m | ✓ | ✓ |
| A02232 | Data cable, 10 m | ✓ | ✓ |
| A02873 | Spare fuse | ✓ | ✓ |
| A00630 | Ethernet coupler | ✓ | ✓ |
| F07503 | NMEA 2000 Ethernet gateway (ShipModul MiniPlex-3E-N2K) | – | ✓ |
| F06130 | Joystick | – | ✓ |
| A03040 to A03044 | NMEA backbone (4 drops), terminators, power cable with fuse, drop cable 3 m | – | ✓ |
You also need: 4 mounting screws, drill, pen, tape measure, level, a computer and an Ethernet router.