| You see | What to do |
|---|---|
| Connecting to Sentry (does not end) | Wait up to 3 minutes after you switch on. Is your device in the same network? Check the data cable and the router. |
| sentry.local does not open | Some devices do not support .local addresses. Use http://192.168.1.191/ or the SEA.AI app. |
| Pan/Tilt Malfunction | Restart Sentry. Check that nothing blocks the movement. Call support if it stays. |
| Message about reduced image quality | Electromagnetic interference. Move Sentry further away from radar and radio antennas. Call support. |
| No alarms | Camera Control has no alarms. Choose Collision Avoidance or Surveillance. Check Mute and the speaker. |
| No detections, no boxes | No active AI subscription. Contact your dealer. |
| Many false alarms | Masts or antennas in view: create the obstruction mask (Commission the system). Check the mounting height. |
| Distances wrong | Check Mounting Height and Distance to Bow in the vessel parameters (on land: Height to Water and Home Heading). |
| Sound Disabled on Start | Phones and browsers block sound until you touch the screen. Tap the screen once. |
| Product Key lost | Log in at connect.sea.ai. Your Product Key is in your account. |
| No Detection Available | Track ← →: there is no other detection on that side. |
| Reconnecting to NMEA2000 | Check the gateway, its IP and port, and its network cable. |
Nothing found. Contact service@sea.ai.