
- Fasten the bracket (A04280) with four 5 mm fasteners and thread locker.
- Put isolation paste (A04800) between aluminium and steel.
- Unit to bracket: four M4 × 10. 3 Nm.
- Bracket to socket: two M8 × 25 with washers. 24 Nm.
The unit can also hang under a horizontal panel or sit on a vertical panel. Sailing yachts can use the wind sensor bracket (A04300).
Wire it
CautionWrong polarity destroys the unit. Use a dedicated breaker and fuse.


| Wire | Connect to |
|---|---|
| Red | + (12 to 36 V DC) |
| Black | − |
| Brown | − or a switch to −. Turns the unit on. |
| Drain | Vessel ground or − |
CautionLong cable, more voltage. Cable longer than 10 m: use 24 V DC. Cable longer than 70 m: use 36 V DC. A long cable loses voltage, and the unit can fail to start.
Connect the RJ45 plug to a 1 Gbit port. Use original SEA.AI cables and make drip loops.

