| You see | What to do |
|---|---|
| The app does not find Watchkeeper | Is your device on the boat network? Wait up to 3 minutes after you switch on. Open watchkeeper.local in a browser. Check the data cable and the router. Restart the router, then Watchkeeper. |
| watchkeeper.local does not open | Some devices do not support .local addresses. Use the SEA.AI app, or the IP address of Watchkeeper from the device list of your router. |
| Product Key lost | Log in at connect.sea.ai. Your Product Key is in your account. It is also in the registration e-mail. |
| No alarms | Docked mode or muted. Select Coastal or Offshore. Check the speaker. Check the AI subscription. |
| No detections, no boxes | No active AI subscription. See sea.ai. |
| No video | Check power and connectors. Restart. |
| Sound Disabled on Start | Phones and browsers block sound until you touch the screen. Tap the screen once. |
| Alarm Sound Failed | Check the audio settings and connected devices. |
| System Overheating | Wait. The thermal camera recovers when it cools down. |
| Color Camera Error, Thermal Camera Error | Check the connection. Restart. Call support if it stays. |
| Orientation Sensor Error | Restart. Call support if it stays. |
| Reconnecting to NMEA2000 | Check the gateway and its network cable. |
| Many false alarms | Change the operation mode. Coastal alarms only for close, dangerous objects. Make sure the obstruction mask is done correctly (Commission the system). |
| MFD video black or stutters | Lower resolution or bit rate in the Advanced tab. |
| No Storage Device Found | AI feedback cannot record. Call support. |
Nothing found. Contact service@sea.ai.